Robot Coupe CMP 300 V.V. Especificações descarregar pdf (Página 9)

• Removing the bell from the tube

- Unplug the power mixer.

- Turn the bell in the direction of the arrow (1) (see

next figure) to separate the bell lug from the

tube lug .

- Remove the bell.

If jammed, turn the blades inside the bell in the di-

rection of the arrow (2) to loosen them from the

drive shaft.

• Removing the blades

- Unplug the power mixer then, hold the blades

with the provided blade-locking tool.

- Using the blade-locking tool, unscrew the drive

coupling then remove the blade for easy cleaning.

- WHISK

• Attaching the whisk holder to the motor unit

(only for CMP Combi)

- Unplug the power mixer.

- Align the flat side of the conical part of

the whisk holder with the catch on the inside

of the aluminum casing.

- Insert the conical part of the whisk holder into

the aluminum casing.

- Turn the whisk holder in the direction of the arrow

(see figure) until it is snugly locked into place.

• Removing the casing

- Unplug the power mixer.

- Turn the whisk holder in the opposite direction

from that used to attach it.

- When it will go no further, remove the whisk

holder from the aluminum casing.

• Fitting the whisk into the whisk holder

- Grasp the holder in one hand.

- With the other hand, take the first whisk and insert

the shaft into the bore of the whisk holder

drive shaft. Make sure the drive lugs are pro-

perly aligned with the notches.

- As you push the whisk into the holder drive shaft

, rotate it slightly in order to slide the drive lugs

into the notches of the drive shaft , thereby

locking the whisk into place inside the shaft.

- To check that the whisk is properly fixed inside the

shaft , gently pull the metal wires.

- Repeat this procedure with the second whisk. If

you cannot push it in properly, remove it, rotate it

90° and start again.

BLADE LOCKING

BLADES WITH WATERTIGHT SEALS

BELL

DRIVE COUPLING

BLADE REMOVAL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 46 47

Comentários a estes Manuais

Sem comentários

Robot Coupe CMP 300 V.V. Especificações Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Misturadores Robot Coupe CMP 300 V.V.